SILWAY5260 is a 60% actives non-ionic emulsion formulated with a polydimethylsiloxane.
Mould release of: Rubber or plastic parts (stoppers, screw tops, bungs, etc.)
As ingredient in polishes formulations for car and furniture
For use as release/lubricant：
SILWAY5260 Emulsion may be applied in a diluted form by the conventional methods of spraying, dipping, wiping or brushing.
Low hardness water should be used for dilution. A typical dilution is SILWAY5260 Emulsion 1:20 with water (by weight)
but the user should determine the best concentration and application method on a small scale before production.
For use as fabric finish agent：
SILWAY5260 Emulsion can be applied to fabric by padding. The amount of emulsion required will depend on the fabric constructions
and type of fabric used (natural, synthetic). Generally, between 6 g/1 and 25 g/1 bath concentration is recommended.
Ready to use non-ionic emulsion
Provides gloss and water repellency
General purpose release agent
Imparts softening and lubrication to textiles
Does not contain alkylphenolethoxylates (APEO)
Excellent emulsion stability up to 50°C
Excellent dilution stability up to 2% in water
Good freeze thaw stability (5 cycles)
Typical Physical Properties
Packing ：200L drum or 1000L IBC drum
Storage ：Storage in closed containers
Shelf Life： 12 months